The Realme 10 series recently received Chinese certification. New Chinese clearances have allowed us to glimpse more of the Realme 10 and 10Pro+’s designs. The Realme 10 has a flat screen, a back with two enormous cutouts for the cameras, and a dual camera setup (RMX3663).
The volume and power buttons are located on the right side of the Realme 10 5G, which has a flat design. The power button allegedly serves as a fingerprint reader as well. Specifications for the device are not mentioned in the so-called TENAA listing.
In the meantime, an RMX3687-model Realme 10 Pro + 5G variant has also been seen on TENAA. It appears to have a curved screen and a hole in the center. The rear panel appears to be curved when there are two rear cameras set up. Possibly on the right margin are the volume control and power button.
On the 3C certification page, Realme 10 Pro + 5G (RMX3687) was also found. This list indicates that the phone might support 67W rapid charging. The RMX3686 model of this smartphone recently received CQC certification, indicating that it might have a 5000mAh battery inside.
The Realme 10 Pro+ is rumored to have a 5,000 mAh battery, a 50MP primary camera with optical image stabilization, a Dimensity 1080 engine, and a 120Hz OLED screen. The Realme 10 is expected to be powered by a 5,000 mAh battery and the Helio G99 chipset. At 33W, it charges more slowly, though. When the two new phones are initially released, Realme UI 3.0 ought to come preinstalled on each of them.
