TECNO CAMON Slim smartphone was earlier spotted on several key global certification databases, and now its design has been shared online.

Here is what has been shared online.

TECNO CAMON Slim – Design Revealed

Via a post shared by a user on X, the design of the upcoming TECNO CAMON Slim smartphone has now been revealed. As per the shared image, the device appears to feature a design similar to the Spark Slim device, especially with respect to the camera module.

Speaking more about the design, the smartphone can be seen with a horizontal pill-shaped camera deco, housing two circular camera cutouts placed towards both ends. However, the major difference here is that the camera module also appears to have multiple small LED lights in the middle, giving it a matrix-like look. An LED flash can also be seen placed below these small LED lights.

The device is also seen in a white base finish with bold black geometric lines, giving it a modern abstract pattern. Furthermore, pastel color blocks in blue, green, and yellow are also present on the rear panel, adding to its overall design appeal. Apart from the design, the user also states that the upcoming device will feature a 6.39 mm slim profile, which is said to be slightly thicker than the TECNO Spark Slim. He also mentions that the smartphone will be equipped with a Sony LYTIA 600 main camera sensor.

Looking into its previous listings, the FCC certification had revealed that the device (model number – Cn6c) will be backed by a 7000mAh typical capacity battery, while its rated capacity was mentioned as 6840mAh with the battery model number BL-68DX. The listing also revealed support for 60W fast charging with the U600TSA charger. Notably, the same design schematic was also revealed earlier via the FCC database.

However, the TUV listing had mentioned two different battery capacities — 5800mAh and 5430mAh — which is different from what was revealed through the FCC listing. The listing also included country codes of EU nations and Saudi Arabia, which could mean that the battery capacities may vary depending on the region.

Furthermore, two memory variants — 8GB + 128GB and 8GB + 256GB — were seen on the Carlcare Services India website. Apart from this, the Google Play Console and Geekbench listings of the device had revealed it could come with either MediaTek Helio G200 or G100 or G99 SoC, 8GB RAM, and Android 16 operating system.

With the design of the TECNO CAMON Slim now being shared online, it remains to be seen when the brand will be officially unveiling the device in the global market.

Stay tuned for more updates.

The post Upcoming TECNO CAMON Slim’s First Look Shared Online appeared first on The Tech Outlook.

The Chinese manufacturer Honor yesterday revealed that its X series is trusted by 130 million users worldwide. In the same Weibo post, the brand has also teased the launch of its all-new Honor X80 Pro Max smartphone.

The device is teased to arrive with hardcore strengths, reaching new heights. The company has not revealed the design and other details of this upcoming smartphone, but since the launch is officially teased, Honor is expected to soon start sharing the other details as well.

Ahead of this upcoming launch, the alleged live image of the Honor X80 Pro Max has also leaked online, revealing its key details.

Honor X80 Pro Max:  Alleged Live Image leaked

The above image reveals that the device features a plain leather rear panel in a cream-colored tone. There is a red strip at the bottom, while Honor branding can also be seen in a box. It features the same circular camera module as seen in the previous-gen models. The front side features a punch-hole cutout for a selfie camera with curvy corners and sleek edges.

The image shows the About section of the device, which reveals that the smartphone is powered by the Snapdragon 6 Gen 5 SoC with 8GB RAM (+16GB Smart memory) and 256GB internal storage. It is powered by a 11000 mAh Qinghai Lake battery and sports an Honour Oasis Eye protection screen that offers 2788×1280 screen resolution. The device arrives with the BSN-AN00 model number.

Stay tuned with The Tech Outlook for the latest tech updates.

Via 1, 2

The post Honor X80 Pro Max launch teased in China; Live images also leaked online appeared first on The Tech Outlook.

OnePlus recently confirmed the launch of two new devices for the Indian market, including a new OnePlus N6 series handset and the Nord Buds 4 earbuds. While only the microsites for the upcoming devices are currently live and no major specs or details have been officially revealed yet, a new tip has now shared the key specifications and expected pricing of the earbuds.

Here’s more about it.

OnePlus Nord Buds 4 – Tipped Pricing and Key Specs

In a new post shared on X, tipster @Gadgetsdata has revealed that the upcoming OnePlus Nord Buds 4 will be priced at INR 3,499 in India. Along with the pricing, the tipster has also shared a few of the key specs and features of the upcoming earbuds.

As per what has been tipped, the OnePlus Nord Buds 4 will feature a 12mm driver and will be supporting Bluetooth 6.1 connectivity. The earbuds are also said to come with a slide gesture to control volume, which appears to be a very convenient feature and is something that other brands should also consider adding to their earbuds.

Speaking more, the upcoming earbuds are tipped to support 47ms low latency, Google Fast Pair, and Microsoft Swift Pair. ANC and Spatial Audio support are also said to be offered on the Nord Buds 4, along with an IP55-rated body for dust and water resistance.

The tipster has further mentioned that the earbuds will take around 90 minutes to charge fully, and fast charging support will also be there. With the tipped pricing of INR 3,499, the Nord Buds 4 will be INR 500 cheaper than the existing Nord Buds 4 Pro. To note, the tipster has also pointed out that the Pro variant will offer better ANC and battery backup.

Stay tuned for more updates.

The post OnePlus Nord Buds 4 Pricing and Key Specs Tipped; Said to Be INR 500 Cheaper Than Pro Variant appeared first on The Tech Outlook.

A few days back, an OPPO smartphone carrying the model number of ‘PYD110’ had made its way to China’s TENAA certification database, revealing a few of its key specs. However, the listing did not reveal the design of the upcoming device at the time. Now, the same certification database has been updated with the press renders of this smartphone, giving us a look at its rear design.

Here’s more about it.

Alleged OPPO K15 – Press Renders Listed on China TENAA

On the TENAA certification database, OPPO’s upcoming smartphone carrying the model number of ‘PYD110’ has now been listed with its press renders. The device is currently believed to be the alleged OPPO K15, but to note, the moniker has not been revealed yet.

Speaking more about its design, the smartphone is shown in a White color option. At the top-left corner of the rear panel, it features a large square-shaped camera module with rounded edges, housing two large circular camera rings. Along with these, two smaller circular cutouts can also be seen, likely for an additional sensor and LED flash. The camera island also carries small screw-like design elements.

The rear panel further features subtle angular lines running across the back, giving it a slightly different design language. A dotted triangular pattern is also placed below the camera module, and this could possibly work as a speaker grille. The OPPO branding has been placed vertically near the lower-left side of the rear panel.

As per what had been revealed earlier, the upcoming OPPO ‘PYD110’ smartphone will be supporting GSM, WCDMA, LTE FDD, TD-LTE, and NR SA network standards. The listed network bands include GSM 900MHz/1800MHz, WCDMA Band I/VIII, LTE FDD Band 1/3/5/8, TD-LTE Band 38/39/40/41, and NR SA Band 41/78/28/N1/N8/N5. Support for GPRS, EDGE, VoLTE, VoNR, and 5G messages has also been revealed for the device.

Speaking more, in terms of size, it has been pointed out to measure 158.3 x 75.13 x 8.27 mm, and the device will be weighing 205gm. For its display, a 6.59″ AMOLED display screen has been revealed, and it will be supporting 1256 x 2760 pixels resolution and 1.073 billion colors. The upcoming device is also revealed to pack a 7755mAh rated battery backup, and it will be powered by a 2.5GHz-clocked octa-core processor. 8GB/12GB RAM and 256GB/512GB internal storage options have also been listed.

On the camera side, a 50MP + 50MP dual rear camera unit can be expected, while for selfies, a 50MP front-facing camera will be offered. The listing mentions a total of three cameras on the device. However, optical zoom support has not been mentioned.

The smartphone is also listed to feature infrared, Bluetooth, and USB connectivity, along with other specs like a gravity sensor, proximity sensor, light sensor, in-display fingerprint recognition, and face recognition. It will be arriving in a bar-type form factor with a virtual keyboard, and to note, expandable storage support will not be offered. Other details such as built-in antenna support, voice fallback to GSM and WCDMA, VoLTE, VoNR, regular text messages, MMS, 5G messaging, and supplementary services including number identification, call forwarding, call waiting, and call hold have also been mentioned.

Stay tuned for more updates.

The post Alleged OPPO K15 Design Revealed in White Color Option via TENAA appeared first on The Tech Outlook.

On the Google Play Console database, Tecno’s upcoming Spark 50T 4G smartphone has now been spotted. Via its listing, the moniker, key specs, and design details of the device have been revealed too.

Read more about it below.

Tecno Spark 50T 4G – Google Play Console Listing

The Tecno Spark 50T 4G smartphone, which carries the model number of ‘K05’, has been listed on the Google Play Console database, and this listing confirms the moniker of the upcoming device. Speaking more, the 4GB RAM variant of the smartphone has been spotted, and it is revealed to feature the MediaTek ‘MT6789V/CD’ processor with an architecture of 2x 2.20GHz-clocked ARM Cortex-A76 cores + 6x 2.00GHz-clocked ARM Cortex-A55 cores, integrated with the 2x 1068MHz-clocked ARM Mali-G57 GPU. Based on these chip details, it points to the MediaTek Helio G99 SoC. However, since this is a 2022-launched chipset, chances are also there that the device could come equipped with a newer Helio G100 or Helio G200 processor, as these chipsets also share a similar core architecture.

Also, other specs like the Android 16 OS with XOS 16 on top, 720 x 1576 pixels screen resolution, and 320 DPI pixel density have also been revealed for the upcoming device.

As mentioned, the design render of Tecno’s Spark 50T 4G has also been added on the Google Play Console database, revealing its front look. The device is revealed to feature thick bezels and an even thicker chin, along with a punch-hole selfie camera. The volume rockers and power button can also be seen placed on the right-side panel.

Looking into previous updates, the same model number had earlier appeared on the EEC certification database with the Tecno Spark 50 Pro moniker. Moreover, its previously spotted FCC certification had also revealed a few details about the upcoming device. The FCC listing mentioned the adapter model numbers ‘U600TSA(CY)’ and ‘U600TSA(KY)’, which appear to be region-specific, and it also revealed that the charger will support up to 60W fast charging.

Furthermore, the battery model number revealed for this device mentions a typical capacity of 5600mAh, while its rated capacity is 5430mAh. The software version mentioned in the listing was ‘K05-16.2.0’, again confirming that the device will launch with the Android 16 operating system. Additionally, an 8GB + 256GB memory option was also confirmed via the FCC certification.

Speaking about its rear design schematic, the device was revealed with a rectangular camera deco extending towards both sides and slightly raised from the back panel. Inside the deco, towards the upper left-hand side, a horizontal pill-shaped design can be seen, below which a circular cutout is also visible, and this may house the camera sensor. Along with this, an NFC marking is also seen, and towards the right side of the deco, two small circular cutouts are placed vertically.

Stay tuned for more updates.

The post Tecno Spark 50T aka Tecno Spark 50 Pro 4G Spotted on Google Play Console, Key Specs Revealed appeared first on The Tech Outlook.

Recently, the global variant of the OPPO Reno 16 F 5G smartphone had made its way to multiple certification databases, revealing a few key details about the upcoming handset. Adding to it, the device has now appeared on the Google Play Console database, along with Reno 16 FS 5G and Reno 16C 5G.

Read more about the update below.

OPPO Reno 16 F 5G AKA Reno 16 FS 5G AKA Reno 16C 5G – Spotted on Google Play Console

As mentioned, the upcoming OPPO Reno 16 F 5G smartphone has now been spotted on the Google Play Console database, and the listing reveals that the device carries the model number of ‘CPH2859’ and the device code of ‘OP62F3L1’. Speaking more about the revealed specifications, the device is listed with the MediaTek MT6878 chipset, featuring four ARM Cortex-A78 cores clocked at 2500 MHz and four ARM Cortex-A55 cores clocked at 2000 MHz, along with the ARM Mali-G615 GPU clocked at 1047 MHz.

Based on the mentioned CPU and GPU architecture, the chipset could either be the MediaTek Dimensity 7300 or the MediaTek Dimensity 7360, as both chipsets share similar core and GPU architecture. Also to note, the latter was launched as a re-branded version of the Dimensity 7300.

Moreover, the OPPO Reno 16 F 5G has also been listed with 12GB RAM and will be running on the Android 16 operating system. Coming to its design, the front side of the smartphone features a punch-hole display, while the power button and volume rocker can be seen on the right side. A third button is also visible on the left side, which could possibly be a dedicated AI key, however, this is not confirmed yet. The listing further reveals a screen resolution of 1020 x 2372 pixels and a pixel density of 480 DPI.

Another important detail has been revealed through the Google Play Console Supported Devices List, which confirms that this same device will also launch as the OPPO Reno 16 FS 5G. Similar to how the Reno 15 F 5G featured a slightly bigger battery and more memory options than the Reno 15 FS 5G while keeping most of the other specifications the same, the same could be followed with the Reno 16 F 5G and Reno 16 FS 5G models as well.

Notably, the Google Play Console Supported Devices List also suggests that the OPPO Reno 16C 5G will likely be a re-branded version of the same device, as it has been listed with the same model number and device code. Previously, this same device had also appeared on the NBD database, which revealed a 12GB/512GB storage variant. However, in the previous database listings, the moniker that was spotted was the OPPO Reno 16 F 5G.

Speaking more, the OPPO Reno 16 F 5G was earlier spotted on the TDRA database, which confirmed its launch in the UAE market, while the TUV listing revealed 80W fast charging support. Along with this, the same model number had also appeared on the EEC database and the Indian BIS database.

For the European region, this device is expected to launch in two versions — OPPO Reno 16 F 5G and OPPO Reno 16 FS 5G, with the latter likely being a trimmed-down version of the former. In India, however, this same variant will likely launch as the OPPO Reno 16C 5G, as the same model number has already appeared on the BIS database as well.

Lastly, 91Mobiles had previously reported that a total of four Reno 16 series smartphones will break cover in India next month (July), including the vanilla Reno 16, Reno 16 Pro, Reno 16 Pro Mini, and Reno 16C 5G models.

Stay tuned for more updates.

The post OPPO Reno 16 F 5G AKA Reno 16 FS 5G/Reno 16 C 5G Spotted on Google Play Console With MediaTek MT6878 Chipset, Android 16, 12GB RAM, and More appeared first on The Tech Outlook.

Xiaomi’s upcoming alleged Smart Band 11 Active has now been spotted on the UAE’s TDRA certification database. In addition to hinting at its possible launch in the UAE, the certification listing has also revealed a few key details about the device.

Check out more about this latest update below.

Alleged Xiaomi Smart Band 11 Active (M2561B1) – UAE TDRA Certification

A new Xiaomi device carrying the model number ‘M2561B1’ has received TDRA approval, and rumours claim that it belongs to the upcoming Xiaomi Smart Band 11 series. The device has been categorized as a ‘Bluetooth’ product and was certified on the 9th of June 2026 with the equipment registration number ‘ER60409/26’.

Notably, the moniker of the device has not been mentioned on the TDRA database. However, an earlier report from Chinese Smartwatches had spotted the same model number on two other certification platforms, including IMDA and NCC. The moniker was also not revealed through those listings, but the publication suggests that this newly spotted smart band could likely be the Xiaomi Smart Band 11 Active.

Xiaomi is yet to officially confirm any details regarding this device, but more updates concerning it may be arriving in the coming days.

Stay tuned and don’t miss out on them.

The post New Xiaomi Smart Band (M2561B1) Spotted on UAE’s TDRA Database, Could Be Part of Upcoming Smart Band 11 Series appeared first on The Tech Outlook.

Following the launch of the Honor X7e 4G, it appears that the brand is now preparing to unveil a 5G Plus variant of this handset, as it has been spotted on two certification platforms.

You may read more about it below.

Honor X7e Plus 5G – TDRA and SGS

This upcoming device has been approved by the UAE’s TDRA certification platform with the equipment registration number “ER60470/26”, dated June 11th, 2026. The listing also confirms its model number as “MRK-NX1”. Furthermore, as the moniker includes 5G, this also confirms the connectivity support of the device.

Another certification on which this new handset has appeared is SGS, with the certification number “FI-69290”, dated 8th May 2026. The details shared on the listing reveal, “Powered by external adaptor or internal lithium battery; Altitude max. 2000 m; Tma = 35 ºC; Class III”. Under the national differences section, the listing mentions country codes for the EU and Saudi Arabia, suggesting its possible launch in these markets as well.

Notably, the Honor X7e was launched as a 4G device powered by the Helio G81 Ultra chipset. Since these two certifications do not reveal much in terms of specifications for this newly discovered device, hopefully, in the coming days, it may appear on Geekbench or other certification platforms, which could give us some additional information about it.

Stay tuned for more updates!

The post Honor X7e Plus 5G Spotted on UAE’s TDRA and SGS Certification Databases, Hinting at Imminent Launch appeared first on The Tech Outlook.

A new Y series handset from Vivo is likely to launch soon in China, as we have now spotted the Vivo Y6e on the Google Play Console Supported Devices list.

Here is what has been revealed.

Vivo Y6e – Google Play Console Supported Devices List

As per the Google Play Console Supported Devices list, this new Vivo handset carries the model number “V2559A”, and next to it, the device code has been mentioned as “PD2559”. The listing confirms the moniker of the device to be Vivo Y6e.

However, one thing to notice here is that this model number is the same as that of the Vivo Y60 handset, which was launched earlier in the market. So far, Vivo has already launched a series of smartphones that appear to be rebranded versions of the Vivo Y60, including the Vivo Y60s, Vivo Y60m, and Vivo Y6t, if we go by the device code.

This would mean that the newly discovered Vivo Y6e may also bring the same spec sheet as that of the Y60. Moreover, the difference is probably going to be in the memory variant with which this new device will be launched, as we have seen with the other variants as well.

More details regarding the Vivo Y6e are expected to be revealed in the coming days.

Stay tuned for more updates!

Vivo Y60 Specifications

The post Vivo Y6e Smartphone Spotted on Google Play Console Supported Devices List, Appears to be a Rebrand of Vivo Y60 appeared first on The Tech Outlook.

Update on 11th June 2026:- As details shared to us by one of our readers, Motorola’s MOTO G MAX smartphone had already been unveiled in the Brazilian market, and it is currently available for purchase in the country.

The MOTO G MAX smartphone is powered by MediaTek’s Dimensity 6400 processor, integrated with the ARM Mali-G57 MC2 GPU, and it offers 8GB RAM along with up to 16GB Smart Boost RAM. For storage, the device comes with 256GB internal storage.

For its display, the smartphone features a 6.8″ 1.5K Super HD Extreme AMOLED screen with 1272 x 2772 pixels resolution, 120Hz refresh rate, and up to 5000 nits brightness. To note, it runs on the Android 16 operating system.

200MP main camera (f/1.8 aperture, OIS support, and Ultra Pixel technology), along with an 8MP ultra-wide camera (120° field of view and f/2.2 aperture) are given at the rear. For selfies, a 32MP front-facing camera with f/2.2 aperture is also given, and it supports 2K video recording at 30fps and Full HD video recording at 30fps.

Further, it packs 5200 mAh battery, and supports 33W TurboPower fast charging. Other notable features include an in-screen fingerprint sensor, facial recognition, accelerometer, gyroscope, proximity sensor, ambient light sensor, compass, SAR sensor, and USB Type-C port.

Speaking about its connectivity specs, it supports 5G SA/NSA/DSS, 4G LTE, 3G WCDMA, and 2G GSM networks. The smartphone also includes WiFi 802.11 a/b/g/n/ac with 2.4GHz and 5GHz band support, Bluetooth 5.4, NFC, Nano SIM + eSIM support, and GPS along with Glonass, Galileo, QZSS, and Beidou location positioning services.

Coming to its design, the MOTO G MAX measures 164.58 x 77.37 x 7.38mm and weighs 183gm. It is available in Graphite Black and Light Blue color choices.

Pricing Details

Motorola’s MOTO G MAX comes in a single 8GB/256GB storage option carrying a price tag of R$ 2,519.10 (~ INR 46,728.29) and is listed on Motorola’s Brazil website for purchase.

Old story continues below.

A new Motorola device has now appeared on the Geekbench database, and interestingly, the listing has revealed a completely new moniker called Moto G Max. With this, it seems that Motorola could be planning to introduce a new ‘Max’ variant under its G-series lineup.

Read more about the latest update below.

Motorola Moto G Max – Geekbench Listing

As per what has been revealed via the Geekbench listing, which was first spotted by tipster Abhishek Yadav, Motorola’s upcoming G-series handset will be arriving with the Moto G Max moniker. However, the benchmark listing does not reveal the model number of this device.

Speaking more, the listed Motorola smartphone has been tested with the Android 16 operating system and 8GB RAM option. The chipset’s codename mentioned on the listing is ‘MediaTek MT6835’, and it features two cores clocked at 2.50GHz and six remaining cores clocked at 2.00GHz. This confirms that the device will be powered by the MediaTek Dimensity 6400 SoC, paired with the Mali-G57 MC2 GPU, which has also been pointed out via the Geekbench platform.

Regarding its performance, the Moto G Max smartphone has achieved 818 points and 2154 points respectively in the single-core and multi-core tests. Notably, the ‘Max’ branding used in the moniker may likely suggest a larger battery capacity, as several smartphone makers have been using similar names for their battery-focused devices.

Also to add, Motorola has used similar branding in the past as well. During the early 2010s, the brand introduced devices such as the Droid RAZR Maxx and RAZR HD Maxx, which were known for packing larger batteries at a time. Later in 2014, the Moto Maxx was also introduced globally, while the same device arrived as the Droid Turbo in the US market.

However, Motorola later moved away from the ‘Maxx’ branding, and its battery-focused philosophy was continued through the Moto G Power series. On the other hand, its premium smartphone approach later moved towards the Motorola Edge Plus and Razr Ultra lineups.

As of now, nothing more can be said about this upcoming Motorola device, since this is the first time the handset has appeared on a database. However, this may not be the last time we hear about it, and more details concerning the Moto G Max smartphone can be expected to be revealed soon.

Stay tuned for more updates.

The post [Update: Moto G Max Already Launched in Brazil in May] Motorola May Launch New “Moto G Max” Smartphone, Spotted on Geekbench Database With Dimensity 6400 SoC appeared first on The Tech Outlook.